Archive for the ‘Uncategorized’ Category

Waratah Poclain motor reseal MS08

11th November 2009 by Doug Hanson No Comments

To perform a fast shaft seal replacement on a Poclain MS08/Waratah motor:
A quick reseal on a Poclain MS08-9-12A-A08-1129-DJMO motor. This unit is off of a 622B Waratah processor head. A factory seal kit is around $900.00. In this instance the customer wanted just the shaft seal replaced with absolute minimum down-time.
Ordering the high pressure double [...]

Pattern Changer Valve – Holmbury Inc.

23rd September 2009 by Doug Hanson No Comments

Holmbury’s OCUKAC2318 is a high quality  pattern changing valve with a steel body and hardened spool for pilot applications, such as switching between John Deere and Cat control patterns on excavators.

Pattern Changer Valve

I recently installed one of these valves on a Caterpillar 321B excavator. Right out of the box, its ready to go. On this [...]

PVG32 Actuator Seal Fix

9th September 2009 by Doug Hanson No Comments

Want a good seal for your PVG32 actuator?
Sauer Danfoss PVG32 PVMD actuators (used on Waratah Processors), have a u-cup sealing the actuator shaft to the housing. It has been my experience that this seal is not included in the PVM seal kit. Waratah has created a seal kit, however it has also been my experience that [...]

Welcome to Hanson Hydraulics Blog!

6th September 2009 by Doug Hanson No Comments

Welcome to Hanson Hydraulics Ltd. Blog. This blog was formerly located at hansonhydraulics.blogspot.com . We have recently rebuilt our web page and decided to host our own blog as well as our own Forum which can be found at hansonhydraulics.com/phpBB3 .
Please feel free to sign and up and follow along, or join a discussion on [...]

Bad Behavior has blocked 39 access attempts in the last 7 days.